[Icom] KAM+ to PRO AGAIN!!
[email protected]
[email protected]
Mon, 18 Mar 2002 06:44:36 +0100
Dear Luis,
You are right! Ground on the ProII is pin 2.
The instructions on page 13 of the ProII manual are correct.
Good luck and 73,
Hans Remeeus.
e-mail: [email protected]
site: www.remeeus.nl
Ham Radio call: PA1HR
----- Original Message -----
From: "Luis Sutil Teixeira" <[email protected]>
To: <[email protected]>
Sent: Sunday, March 17, 2002 11:24 PM
Subject: Re: [Icom] KAM+ to PRO AGAIN!!
> Hi Hans!
>
> I've checked your wiring instructions according the ACC sockets of my
> PRO manual and:
>
> KAMPlus pin 2 Gound should connect to Pin 2 (your instruction is pin 5!)
> Ground (GND) on PRO.
> I see that pin 5 in PRO is AF (AF detector output)...
>
> Pse confirm
>
> 73 de Luis, CT4NH
>
> ----- Original Message -----
> From: <[email protected]>
> To: <[email protected]>
> Sent: Sunday, March 17, 2002 8:35 PM
> Subject: Re: [Icom] KAM+ to PRO
>
>
> > Dear Luis,
> >
> > The right connections are:
> >
> >
> > KAM Plus (HF Radio): IC-756ProII (ACC1):
> >
> > Pin 5 Transmit audio (FSK) ---> Pin 1 RTTY keying
> >
> > Pin 2 Ground -------------------> Pin 5 Ground (GND)
> >
> > Pin 3 Push-to-Talk -------------> Pin 3 PTT
> >
> > Pin 6 Receive audio -----------> Pin 5 AF (AF detector output)
> >
> >
> > For AFSK you may use:
> >
> > KAM Plus (HF Radio): IC-756ProII (ACC1):
> >
> > Pin 1 Transmit audio (AFSK) --> Pin 4 MOD (modulator input)
> >
> >
> > I suggest that you combine FSK and AFSK. So, connect Pin 5 from the
> KAM Plus
> > to Pin 1 of the ProII and connect Pin 1 from the KAM Plus to pin 4 of
> the
> > ProII. In this way you are able to use FSK and AFSK without changing
> cables
> > etc.
> >
> > By the way. Pin 7 of the ProII is +13,8 Volt with a maximum of 1 A.
> You may
> > use this to power your KAM Plus.
> >
> >
> > Good luck and enjoy the combination KAM Plus with ProII!
> >
> > 73,
> > Hans Remeeus PA1HR.
> >
> > e-mail: [email protected]
> > site: www.remeeus.nl
> > Ham Radio call: PA1HR
> >
> >
> > ----- Original Message -----
> > From: "Luis Sutil Teixeira" <[email protected]>
> > To: <[email protected]>
> > Sent: Sunday, March 17, 2002 5:40 PM
> > Subject: [Icom] KAM+ to PRO
> >
> >
> > > Hi
> > > Could someone inform me what are the correct connections between
> KAM+,
> > > 8 pin socket and IC756PRO ACC(1) 8 pin socket ?? for RTTY operation.
> > >
> > > Tnx de Luis, CT4NH
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>