[Icom] KAM+ to PRO AGAIN!!

Sun, 17 Mar 2002 22:24:32 -0000

Hi Hans!

I've checked your wiring instructions according the ACC sockets of my
PRO manual and:

KAMPlus pin 2 Gound should connect to Pin 2 (your instruction is pin 5!)
Ground (GND) on PRO.
I see that pin 5 in PRO is AF (AF detector output)...

Pse confirm

73 de Luis, CT4NH

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Sunday, March 17, 2002 8:35 PM
Subject: Re: [Icom] KAM+ to PRO

> Dear Luis,
>
> The right connections are:
>
>
> KAM Plus (HF Radio):                 IC-756ProII (ACC1):
>
> Pin 5 Transmit audio (FSK) --->   Pin 1 RTTY keying
>
> Pin 2 Ground ------------------->    Pin 5 Ground (GND)
>
> Pin 3 Push-to-Talk ------------->   Pin 3 PTT
>
> Pin 6 Receive audio ----------->    Pin 5 AF (AF detector output)
>
>
> For AFSK you may use:
>
> KAM Plus (HF Radio):                 IC-756ProII (ACC1):
>
> Pin 1 Transmit audio (AFSK) -->  Pin 4 MOD (modulator input)
>
>
> I suggest that you combine FSK and AFSK. So, connect Pin 5 from the
KAM Plus
> to Pin 1 of the ProII and connect Pin 1 from the KAM Plus to pin 4 of
the
> ProII. In this way you are able to use FSK and AFSK without changing
cables
> etc.
>
> By the way. Pin 7 of the ProII is +13,8 Volt with a maximum of 1 A.
You may
> use this to power your KAM Plus.
>
>
> Good luck and enjoy the combination KAM Plus with ProII!
>
> 73,
> Hans Remeeus PA1HR.
>
> e-mail: [email protected]
> site: www.remeeus.nl
> Ham Radio call: PA1HR
>
>
> ----- Original Message -----
> From: "Luis Sutil Teixeira" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, March 17, 2002 5:40 PM
> Subject: [Icom] KAM+ to PRO
>
>
> > Hi
> > Could someone inform me what are the correct connections between
KAM+,
> > 8 pin socket and IC756PRO ACC(1) 8 pin socket ?? for RTTY operation.
> >
> > Tnx de Luis, CT4NH
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>