[Icom] OPC-589 wiring

[Keith V]

I don't understand the question.  The only thing you can do with it is
connect up the 8 pin on your mic to the 8 pin connector on the 589 and then
plug the modular connector into the radio.  What am I missing here ?

Van,
K0KAV

----- Original Message -----
From: "David Cook" <davec@netdave.com>
To: <icom@mailman.qth.net>
Sent: Tuesday, June 25, 2002 8:41 PM
Subject: [Icom] OPC-589 wiring


> I recently purchased a 709MKIIG (Wow, what a sweet radio!) and a friend
> suggested I buy the OPC-589 mic adapter cable. So now I'm wondering what
to
> do with it. Are the pins wired in a one-to-one fashion, i.e. pin 1 to pin
1,
> pin 2 to pin 2, etc.? I'm a little surprised they didn't include a simple
> diagram with the adapter. I can ring it out, but if someone knows, it
would
> save me the trouble.
>
> Thanks and 73,
> -- Dave, WA0TTN
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom FAQ: http://www.qsl.net/icom/
>