[Icom] IC-706MKIIG on PACTOR

Mon, 17 Jun 2002 02:27:48 +0000

Are you using FSK? FSK is the designer's intended mode for HF digital on 
this radio. When I got mine a couple of years ago, there was talk of it not 
working properly on PACTOR. Turns out  _only_ guys trying to use AFSK were 
having T/R timing problems with it.

A www.google.com groups search with keywords [problem pactor 706] might 
turn up more.

Jerry W4UK

At 20:06 6/16/02 -0600, Dave Jeffries wrote:
>Hi Peter,
>
>Are you set up to be able to monitor your receive audio while in circuit
>??
>Does it "sound" proper for PACTOR  ?   Is there sufficient level for the
>TNC ??
>
>Just throwing ideas,  I'm not set up for PACTOR myself --yet.
>But it seems that if you're transmitting OK (your unproto remark) the
>only thing left is the receiver settings.
>
>Good Luck.
>
>Dave J          N0GMP
>[email protected]
>====================================
>
>----- Original Message -----
>From: "Peter Scheller" <[email protected]>
>To: <[email protected]>
>Sent: Sunday, June 16, 2002 19:29
>Subject: [Icom] IC-706MKIIG on PACTOR
>
>
>Hi Gang,
>I am still chasing my tail trying to get my 706MKIIG to operate on
>PACTOR
>properly. So far I eliminated wiring, TNC, software and computer. The
>fault seems to be in the radio. The problem is that although everything
>is fine in unproto I cannot connect via F-4, calling a station or be
>called.
>
>Any thoughts on this subject ?
>
>73, Peter, NH6VB. ALOHA.
>
>___