[Icom] IC-706MKIIG on PACTOR

Sun, 16 Jun 2002 20:06:57 -0600

Hi Peter,

Are you set up to be able to monitor your receive audio while in circuit
??
Does it "sound" proper for PACTOR  ?   Is there sufficient level for the
TNC ??

Just throwing ideas,  I'm not set up for PACTOR myself --yet.
But it seems that if you're transmitting OK (your unproto remark) the
only thing left is the receiver settings.

Good Luck.

Dave J          N0GMP
[email protected]
====================================

----- Original Message -----
From: "Peter Scheller" <[email protected]>
To: <[email protected]>
Sent: Sunday, June 16, 2002 19:29
Subject: [Icom] IC-706MKIIG on PACTOR

Hi Gang,
I am still chasing my tail trying to get my 706MKIIG to operate on
PACTOR
properly. So far I eliminated wiring, TNC, software and computer. The
fault seems to be in the radio. The problem is that although everything
is fine in unproto I cannot connect via F-4, calling a station or be
called.

Any thoughts on this subject ?

73, Peter, NH6VB. ALOHA.

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.
----
Your Moderator: Dick Flanagan W6OLD, [email protected]
Icom FAQ: http://www.qsl.net/icom/