[Icom] DC plug for 706

Wed, 05 Jun 2002 19:35:45 -0700

Thanks for the link, I did not see those listed. I stand corrected.
73.

Jim W7RY wrote:

> Look again!  They are on the same page.
>
> Look here:
>
> http://www.powerwerx.com/oem.html
>
> The part number is HF-6.
>
> Let me know if you need any more help!
> 73
> Jim W7RY
>
> ----- Original Message -----
> From: "Gary R" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, June 05, 2002 7:03 PM
> Subject: Re: [Icom] DC plug for 706
>
> > so is the 706 (different that is)... Powerwerx carries direct replacement
> "T"
> > style connectors,  both plugs and recepticles, common on most FM mobiles
> (as
> > previously mentioned). The 706's do not use this connector type instead,
> they
> > use the 6-pin "Molex" style connector more common to DC powered HF rigs.
> > 73.
> >
> >
> > Jim W7RY wrote:
> >
> > > http://www.powerwerx.com/
> > >
> > > This site DOES have them...
> > >
> > > All manufactures are the same. Kenwood/ Icom / Yaesu.  (The FT-100 is
> > > different however)
> > >
> > > 73
> > > Jim W7RY
> > >
> > > ----- Original Message -----
> > > From: "F.R. Ashley" <[email protected]>
> > > To: <[email protected]>
> > > Sent: Wednesday, June 05, 2002 5:27 PM
> > > Subject: [Icom] DC plug for 706
> > >
> > > >
> > > > Hi Group,
> > > >
> > > > Does anyone know if Radio Shack (or anyone else) sells a connector
> that
> > > > matches the Icom 706 DC power plug on the back of the XCVR?
> > > >
> > > > Thanks in advance,
> > > > Buddy, WB4M
> > > >
> > > > ----
> > > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > > Icom FAQ: http://www.qsl.net/icom/
> > > >
> > > >
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
> >
> >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/