[Icom] DC plug for 706

Wed, 5 Jun 2002 19:17:31 -0700

Look again!  They are on the same page.

Look here:

http://www.powerwerx.com/oem.html

The part number is HF-6.

Let me know if you need any more help!
73
Jim W7RY

----- Original Message -----
From: "Gary R" <[email protected]>
To: <[email protected]>
Sent: Wednesday, June 05, 2002 7:03 PM
Subject: Re: [Icom] DC plug for 706

> so is the 706 (different that is)... Powerwerx carries direct replacement
"T"
> style connectors,  both plugs and recepticles, common on most FM mobiles
(as
> previously mentioned). The 706's do not use this connector type instead,
they
> use the 6-pin "Molex" style connector more common to DC powered HF rigs.
> 73.
>
>
> Jim W7RY wrote:
>
> > http://www.powerwerx.com/
> >
> > This site DOES have them...
> >
> > All manufactures are the same. Kenwood/ Icom / Yaesu.  (The FT-100 is
> > different however)
> >
> > 73
> > Jim W7RY
> >
> > ----- Original Message -----
> > From: "F.R. Ashley" <[email protected]>
> > To: <[email protected]>
> > Sent: Wednesday, June 05, 2002 5:27 PM
> > Subject: [Icom] DC plug for 706
> >
> > >
> > > Hi Group,
> > >
> > > Does anyone know if Radio Shack (or anyone else) sells a connector
that
> > > matches the Icom 706 DC power plug on the back of the XCVR?
> > >
> > > Thanks in advance,
> > > Buddy, WB4M
> > >
> > > ----
> > > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > > Icom FAQ: http://www.qsl.net/icom/
> > >
> > >
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > Icom FAQ: http://www.qsl.net/icom/
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>
>