[Icom] MARS xmt for 756ProII
matt
[email protected]
Sun, 28 Jul 2002 18:56:32 -0400
hey guys.... a quick question... i have heard several ways to remove the
diodes... which way do you all recommend? tnx paul w8jn
----- Original Message -----
From: "JV" <[email protected]>
To: <[email protected]>
Sent: Sunday, July 28, 2002 6:49 PM
Subject: [Icom] MARS xmt for 756ProII
> Sorry Ray
> I do have the pro, should been more specific. Another thought,
you
> may want to touch bases with the mod author. So far I think you are OK.
> JV
>
> At 06:34 PM 7/28/2002 -0400, you wrote:
> >Thanks JV,
> >
> >I'm still a bit confused though, referring to the www.dk.mods page:
> >
> >The instructions for a 756Pro Board Version #2 indicates you remove
> >diodes D3751, 3752 and 3753.
> >
> >The instructions for a 756Pro Board Version #03 indicates diode D3751 is
> >already missing and you have to remove diodes D3752, 3753 and 3754.
> >
> >The instructions for a 756ProII indicate remove only diodes D3751 and
> >3752.
> >
> > From your comments sounds like you do have a 756ProII (not a 756Pro) and
> >that you removed diodes D3751, 3752 and 3753.
> >
> >Guess I'll head for the shack workbench and remove that D3753 and see if
> >the clears up my issues!
> >
> >Thanks & 73, Ray W2EC
> >
> >
> >JV wrote:
> > >
> > > Hi Ray
> > > Yes, I removed D3751, 2 and 3. You are right about the
> > > instructions being fuzzy. I believe the instructions said D3751 was
not
> > > there. D3751 was very much in place.
> > > Don't sneeze around those diodes, hi hi.
> > > JV
> > >
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>