[Icom] MARS xmt for 756ProII

[JV]

Sorry Ray
         I do have the pro, should been more specific. Another thought, you 
may want to touch bases with the mod author. So far I think you are OK.
JV

At 06:34 PM 7/28/2002 -0400, you wrote:
>Thanks JV,
>
>I'm still a bit confused though, referring to the www.dk.mods page:
>
>The instructions for a 756Pro Board Version #2 indicates you remove
>diodes D3751, 3752 and 3753.
>
>The instructions for a 756Pro Board Version #03 indicates diode D3751 is
>already missing and you have to remove diodes D3752, 3753 and 3754.
>
>The instructions for a 756ProII indicate remove only diodes D3751 and
>3752.
>
> From your comments sounds like you do have a 756ProII (not a 756Pro) and
>that you removed diodes D3751, 3752 and 3753.
>
>Guess I'll head for the shack workbench and remove that D3753 and see if
>the clears up my issues!
>
>Thanks & 73, Ray  W2EC
>
>
>JV wrote:
> >
> > Hi Ray
> >          Yes, I removed D3751, 2 and 3. You are right about the
> > instructions being fuzzy. I believe the instructions said D3751 was not
> > there. D3751 was very much in place.
> > Don't sneeze around those diodes, hi hi.
> > JV
> >