[Icom] MARS xmt for 756ProII

[JV]

Hi Ray
         Yes, I removed D3751, 2 and 3. You are right about the 
instructions being fuzzy. I believe the instructions said D3751 was not 
there. D3751 was very much in place.
Don't sneeze around those diodes, hi hi.
JV

At 05:39 PM 7/28/2002 -0400, you wrote:
>Hi JV,
>
>My dummy load is a 50 ohm 1kw "oil gallon can" style so I doubt I got it
>hot.
>
>But I did follow the info from the www.dk.mods page which, for the
>ProII, says specifically to remove only two diodes, 3751 and 3752. That
>is all I've removed so far.
>
>The Pro version called for all three diodes to be removed, 3751,2 and 3
>so I'm thinking 3753 also has to be removed but thought I'd check first
>since they are pretty tiny and probably tough to resolder back in with
>my old eyes. Wanted to get an idea what others had done first.
>
>Is yours a ProII that your removed all three diodes from?
>
>Thanks & 73, Ray  W2EC