[Icom] IC-2800 CROSSBAND

Fri, 26 Jul 2002 20:22:55 -0700

DUAL BAND FM TRANSCEIVER
IC-2800H
Cross-Band Repeat Mode Activation Procedure

From the set-up menu, set the squelch delay to "short" (otherwise the
first three seconds of your transmission will be chopped off).

Select the VHF and UHF frequencies you want to link together in
Cross-Band operation.  Program the splits, PL tones, etc., prior to
activating either Cross-Band repeat mode.

To Activate Regular Cross-Band Repeat -
Press and hold "VHF Main", "UHF Main" and "CHG/L" buttons until the "key"
icon appears and begins to flash.

To Activate Cross-Band Repeat with Zero Hang Time -
Press and hold the bottom button on VHF side, "UHF Main" and "CHG/L"
buttons until the "key" icon appears and begins to flash.

To Clear the Cross Band Repeat Function -
Press and hold the "CHG/L" button until the flashing "key" icon
disappears.

73,
Allen
W�KWM

On Fri, 26 Jul 2002 18:42:21 -0400 "K8CMA" <[email protected]> writes:
> Can anyone tell me how to set up the ICOM 2800 for crossband repeat?
> 
>                       Thanks de K8CMA
> 
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.