[Icom] NEED SERVICE MANUAL

Tue, 23 Jul 2002 08:52:18 -0400

From what I understood (until I read the other post), there was no
service manual for this set.  The common problem is on the PLL board and
it is due to plated through holes that lose their continuity.  The
solution has been to place a small strand of wire in EACH AND EVERY hole
(one at a time) and solder it on both sides.  Then you will have cured
the problem once and for all.

I do have the operating manual and schematics.

Ed
K1ZOK

On Mon, 22 Jul 2002 21:24:21 EDT [email protected] writes:
> Hello to All
> 
>   I'm looking for a service manual for an old IC-211.  I have been 
> able to 
> fix a few things on my own but there are two major problems that 
> need to be 
> address.  So if anyone has a manual or a copy please let me know.  
> Even 
> better know were I could pick one up at.  Thanks to all who read 
> this.  
> 
> 
> 
> LEE KEMP N5TIF 73
> [email protected]
> 
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.