[Icom] Icom 756 Pro Questions

Wed, 10 Jul 2002 15:55:58 +0000

One hint:
If you plan to use either the RX-Antenna input or the Xverter jack - the=20
printed docs have these two jacks swapped. There is a small label on the =
back=20
of the rig, this one is correct in telling which jack is which.

This applies to the 756Pro, don't know if it got corrected with the Pro2.

73,
Ekki, DF4OR

Am Mittwoch, 10. Juli 2002 12:58 schrieb Michael Morgan:
> Ok well I decided to order me a new 756 Pro (not the Pro II).  I am
> going to look back through the archives because I remember that there i=
s
> one setting I need to change dealing with the auto tuner and 6 meters.
> That the factory sends it out in such a way it can damage the tuner.  I=
s
> there anything else that I need to watch out for initially?  Any other
> know quirks that I don't know.  I would gladly accept any and all hints=
,
> tricks, and warnings.
>
> Thanks
>
> Michael, AA5SH
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/