[Icom] 706 MKIIG ACC port

Wed, 3 Jul 2002 11:31:26 -0500

Z=Impedance

Van,
K0KAV

----- Original Message ----- 
From: <[email protected]>
To: <[email protected]>
Sent: Wednesday, July 03, 2002 9:02 AM
Subject: RE: [Icom] 706 MKIIG ACC port


> Jerry/W3CDE
> I'm not clear on what you mean hi "Z" and the solder joints "Z" must be
> a symbol for something associated with RF. What is the problem and the
> solution relative to making up these cords for AMP's TNC's etc.   
> 
> 
> Randy
> AC7NJ
> 
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Lofstead, Jerry
> Sent: Wednesday, July 03, 2002 6:27 AM
> To: '[email protected]'
> Subject: RE: [Icom] 706 MKIIG ACC port
> 
> 
> All, 
> 
> One thing to keep in mind on the rear ACC connections on ALL of the
> 706's is that these inputs are all HI Z!!  If you filter, put ferrite
> beads at the soldered point of the wire to keep RF out.  I learned the
> hard way and then talked with ICOM about it...
> 
> Jerry 
> W3CDE 
> 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>