[Icom] 706 MKIIG ACC port

Wed, 3 Jul 2002 07:02:50 -0700

Jerry/W3CDE
I'm not clear on what you mean hi "Z" and the solder joints "Z" must be
a symbol for something associated with RF. What is the problem and the
solution relative to making up these cords for AMP's TNC's etc.   

Randy
AC7NJ

-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf Of Lofstead, Jerry
Sent: Wednesday, July 03, 2002 6:27 AM
To: '[email protected]'
Subject: RE: [Icom] 706 MKIIG ACC port

All, 

One thing to keep in mind on the rear ACC connections on ALL of the
706's is that these inputs are all HI Z!!  If you filter, put ferrite
beads at the soldered point of the wire to keep RF out.  I learned the
hard way and then talked with ICOM about it...

Jerry 
W3CDE 