[Icom] 756 Ant Switches

Sun, 27 Jan 2002 07:50:35 -0800 (PST)

Hi Darrel. I checked my 756proll, with ANT1 selected, ANT2 shows zero ohms
from the coax connector center pin to ground. Sounds like you found your
problem. Good luck, Ken

--- Darrel Nichols <[email protected]> wrote:
> On Saturday 26 January 2002 07:41 pm, you wrote:
> > Darrel,
> >
> > Is this RF coming back down a feedline connected to the external
> > tuner???
> >
> > 73...Don VK6HK
> >
> >
> Nope.   Looked at it with an ohmmeter last evening.   Schem shows
> the relay shorting the unused port, but this one has several megs
> from center pin to ground.   
> 
> I'm thinking the relay is bad, or the schem is wrong.   If someone
> can easily access their antenna ports to check theirs, it would be
> handy.   Otherwise, I'll call Icom Monday.
> 
> TNX,  Darrel N0DBX
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> List Archives : http://mailman.qth.net/pipermail/icom/
> List Control  : http://mailman.qth.net/mailman/listinfo/icom/

__________________________________________________
Do You Yahoo!?
Great stuff seeking new owners in Yahoo! Auctions! 
http://auctions.yahoo.com