[Icom] IC-910H heat/fan problem
Julio
[email protected]
Sat, 23 Feb 2002 12:48:00 -0500
Isn't this the radio you have?
Julio
----- Original Message -----
From: "Marshall V Pochay" <[email protected]>
To: <[email protected]>
Sent: Saturday, February 23, 2002 10:47 AM
Subject: Re: [Icom] IC-910H heat/fan problem
> I noticed just about the same problem. I believe it is a design
> problem. Fan only runs during transmit. I placed a small fan behind the
> rig, which blows toward the heat sink, and have not seen the problem
> since. Added benefit, is the case is cool to the touch, and it is running
> 24 hours a day.
> Marshall W9RVG EM57rn
>
> At 03:26 PM 2/23/2002 +0000, you wrote:
>
>
> >Hello to all,
> >
> > I have a IC-910H with all the option installed. I haven't had
any
> >problems till today. My wife being long winded was talking to a friend
> >for several minutes in 2M FM about 40W when the radio cycled off and on
> >when she keyed up. I repeated this when I ran the radio on a dummy load
> >for a while. The problem appears to be heat. When the radio is
> >transmitting the fan will cycle from slow to fast until the PTT is
> >released. Then the fan stops. Seems to be ambient temp build-up during
> >tx/rx cycles. Shouldn't the radio fan stay running until the temp drops
> >below a set point from a thermostat? I never noticed this before so I
> >don't know it this is a problem with just my radio or a design problem.
> >Anyone out there with an answer? I don't what to send this radio to
> >ICOM only for them to say it's okay. I would appreciate if someone with
> >a IC-910H could duplicate this test and forward a result to me.
> >
> >
> > Ron, N4GFO
> >----
> >Your Moderator: Dick Flanagan W6OLD, [email protected]
> >Icom FAQ: http://www.qsl.net/icom/
> >
> >
> >---
> >Incoming mail is certified Virus Free.
> >Checked by AVG anti-virus system (http://www.grisoft.com).
> >Version: 6.0.325 / Virus Database: 182 - Release Date: 2/19/2002
>
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/mixed
> text/plain (text body -- kept)
> ---
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/
>