[Icom] Source for Icom IC-502A bits

Tue, 19 Feb 2002 10:59:51 -0500

Dear Caity,

I have the 502A also with the battery charger gizmo.  At the Shelby hamfest
last year, I asked several of the NiCad people (1) if they had some N-900C's
and (2) if not where to find them.

I was told by at least two of the battery people that N-900C's had not been
made for several years and they had no clue as to where to look for them.

If you find a source of N-900C's then please let me know.

Pete Underhill  N4JAZ

-----Original Message-----
From: [email protected] [mailto:[email protected]]On
Behalf Of Caitlyn M.Martin
Sent: Friday, February 15, 2002 4:23 PM
To: [email protected]; [email protected]
Subject: [Icom] Source for Icom IC-502A bits

Hi, everyone,

I've acquired a really nice, clean, working Icom IC-502A.  (Yes, I
know... I have a soft spot for the old bookshelf portables. :)

First, I am missing the DC power cord.  This is the one with the strange
three pin female molded plug on the end, which kind of looks like a
triangle with the corners shaved off.  Icom only used these on the
IC-505, IC-502A, IC-202A, and IC-202S.  Kenwood used them on the battery
backup connector on the TR-9000, TS-660, and TR-50.  Does anyone eith
have a spare cord or else does anyone know of a source for the cord
and/or connector?

Second issue:  I have the BC-20 internal battery charger, which seems to
be in good working order.  The N-900C batteries are shot, though.
Anyone have a source for N-900C NiCad or NiMH batteries?

Thanks in advance for any help or leads on finding these items.

73,
Caity
KU4QD

----
Your Moderator: Dick Flanagan W6OLD, [email protected]
List Archives : http://mailman.qth.net/pipermail/icom/
List Control  : http://mailman.qth.net/mailman/listinfo/icom/