[Icom] Does the new Icom Pro require

Mon, 18 Feb 2002 19:08:40 -0500

Joe thank to the good folks on here, I got the answer, that is what I
thought this reflector is for. I surely don't want to spend 20 minutes to a
half hour waiting for an answer I can get here and have a long distance
phone call to boot. I mean no offense,  but to me and others, that is what
the reflector is about. Icom radios and the ins and outs of using them,
enjoying them, etc etc. Thanks to all who helped, I got the help I needed,
73, Steve, NX1G

----- Original Message -----
From: "w3jo" <[email protected]>
To: <[email protected]>
Sent: Sunday, February 17, 2002 5:48 PM
Subject: Re: [Icom] Does the new Icom Pro require

> Why gamble on such a potential problem. Does anyone think that maybe just
a
> simple phone call to Icom would bring an answer before trying to place it
in
> a circuit, instead of trying to solve it here? Good luck
>
>                                                Joe...W3JO
>
>
>
> > Might be just a rumor then - if it was real, ICOM should have corrected
it
> > or acknowledged it by now. Anybody know the source of this?
> >
> > There is no mention of a keying current typo in the Feb 2002 QST writeup
> of
> > the PRO-II or the extended test report (I just looked).
> e specs of the relay at
> > the OEM site?
> >
> > Jerry W4UK
> >
> > At 11:20 AM 2/17/2002 -0600, George, W5YR wrote:
> > >I don't know,  Jerry, since Icom to my knowledge has never admitted to
> the
> > >typo in either manual. In fact, a most interesting question would be
what
> > >would Icom do about a relay on a radio in warranty that was welded due
to
> > >trying to pass up to 2 amps through it?
> > ><SNIP>
> > >
> > >Jerry Flanders wrote:
> > > >
> > > > Does ICOM say it is a misprint? Where can I read what they say on
this
> > > > subject?
> > > >
> > > > Jerry  W4UK
> > >
> > >---
> >
> > ----
> > Your Moderator: Dick Flanagan W6OLD, [email protected]
> > List Archives : http://mailman.qth.net/pipermail/icom/
> > List Control  : http://mailman.qth.net/mailman/listinfo/icom/
> >
>
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> List Archives : http://mailman.qth.net/pipermail/icom/
> List Control  : http://mailman.qth.net/mailman/listinfo/icom/
>