[Icom] Icom 706 MKIIG PSK31 6pin Mini Din Interface Problem - Help!

Wed, 13 Feb 2002 19:32:07 -0700

Hi, Ed
Sorry to hear that, maybe you were using soldering iron which is little
bit too big? Temp. controlled soldering iron is prettly cheap these
days. 
73,
Tony, VE6CGX

Ed Myers wrote:
> 
> This may be irrelevant but my experience trying to solder those tiny Mini
> Dins has been ALL BAD. I melt the case, short pins, etc. I wish they would
> stick to the full size ones. S-Video is a pain too!
> 
> Ed Myers WC4TT
> 
> ----- Original Message -----
> From: "James W. Long" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, February 13, 2002 7:52 PM
> Subject: [Icom] Icom 706 MKIIG PSK31 6pin Mini Din Interface Problem -
> Help!
> 
> Hi all,
> 
> Here is a quick overview:
> 
> I am trying to use the 6 pin mini din connector on the
> back of the IC-706MKIIG for digital communications
> as described on page 37 of the manual and it doesnt
> work as described.
> 
> I have a Rascal soundcard interface
> which takes sound from the radio into the soundcard
> and audio from the computer into the radio.
> The rascal also has an rs232 interface which controls
> PTT, and an LED which indicates when tranmit is on.
> 
> I am using MixW 2.0 software which is like Digipan
> so I can generate a variety of protocols such
> as PSK31 and Packet and SSTV and so on.
> MixW generates these signals in the soundcard
> (which then goes to the radio). The soundcard
> picks up these signals via the radio and Mixw uses
> the a/d converter in the soundcard to decode
> them into english onscreen.
> 
> The PTT is activated by the RTS line on the
> db9 rs232 connector on the computer, and is connected to
> the PTT line on the radio. MixW controls this also.
> 
> The problem:
> 
> I can monitor psk31 and other protocols just fine,
> but PTT will not activate. The rascal LED lites
> but the icom does not go into transmit mode.
> 
> This means the computer, the software and the
> rs232 db9  all work and the Icom (ptt line) doesnt.
> 
> as a result, I also dont know if the data line works
> on the icom either.
> 
> What I DO know for fact:
> 
> 1 .I know the rascal works and is wired correctly.
>     It already works with another radio (Kenwood TM-V7),
>     it transmits and receives perfectly.
> 
> 2.  The pinout for the 6 pin minidin is identical on both radios,
>      "as stated in each user manual" respectively.
> 
> 3.  Icom says its supposed to work as stated. They say its
>      "plug and play" with no needed menu settings.
> 
> 4.   It does  NOT  work as stated.
> 
>  Help!!!
> 
> I welcome any and all info, suggestions or fixes, etc.
> 
> Thank you,
>   James Long, KC8RYX
>   [email protected]
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> ---
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> List Archives : http://mailman.qth.net/pipermail/icom/
> List Control  : http://mailman.qth.net/mailman/listinfo/icom/
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> List Archives : http://mailman.qth.net/pipermail/icom/
> List Control  : http://mailman.qth.net/mailman/listinfo/icom/