[Icom] Icom 706 MK II

[Rick Robinson]

Please don't cry but give the processor reset a try before you send it off.
I know, "I don't want to lose all my programing". Mine did  that also and a
processor reset cleared it right up. If you send it off for repair they will
do it anyway. Sometimes these things happen. Mine did it not long after I
tuned my bandspanner and I was lost until I gave it a try as everything else
seemed ok. Good luck and let us know if this fixed it. BTW do the full
reset. 73, K8DXN
---- Original Message -----
From: "James Vohland" <kc9ani@hotmail.com>
To: <icom@mailman.qth.net>
Sent: Friday, December 27, 2002 7:56 PM
Subject: [Icom] Icom 706 MK II


>
>
>
> -New Ham here and have run into a problem with my ICOM 706 MK ii which
> I am hoping this esteemed group can advise on. I have lost all indication
of
> outpower. Meter indicated zero. Running mobile and was working fine and
> switched bands and was adjusting swr on screwdriver and then nothing.
Works
> fine on 2 meters, just no hf. Are the finals fried. I did tune using tenna
> tuner so output was on l0 watts approx during tune process. Guess its off
to
> the shop. Appreciate any input and have enjoyed this group tremendously.
> (Except for Mr Roberto!) :)
>
>
>
>
> >
>
> _________________________________________________________________
> The new MSN 8: smart spam protection and 3 months FREE*.
>
http://join.msn.com/?page=features/junkmail&xAPID=42&PS=47575&PI=7324&DI=747
4&SU=
>
http://www.hotmail.msn.com/cgi-bin/getmsg&HL=1216hotmailtaglines_smartspampr
otection_3mf
>
> ----
> Your Moderator: Dick Flanagan W6OLD, icom-owner@mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/
>