[Icom] IC 756Pro, PW1 and CT-17

Sun, 1 Dec 2002 17:23:37 -0600

Trying running  a RTTY carrier. You should see 1,000 watts on that PW-1.

Andy  K5VM

----- Original Message ----- 
From: "Mike Mellinger WA0SXV" <[email protected]>
To: <[email protected]>
Sent: Sunday, December 01, 2002 2:21 PM
Subject: RE: [Icom] IC 756Pro, PW1 and CT-17

> The meter on the PW-1 does not read PEP so the behavior you describe is
> normal.
> 
> 73,
> Mike WA0SXV
> 
> -----Original Message-----
> From: [email protected] [mailto:[email protected]] On
> Behalf Of Warren McKenzie
> Sent: Sunday, December 01, 2002 13:15
> To: [email protected]
> Subject: RE: [Icom] IC 756Pro, PW1 and CT-17
> 
> Thanks,
> 
> The baud rate is fixed at 9600. After reading the replies I got on the
> reflector, I essentially ignored the extra warning page that came with
> the PW1 and hooked it up according to the tech notes on the web site. It
> seems to follow the frequency shifts fine. My guess is Icom got tired of
> support questions and just decided to say "don't do it".
> 
> The only problem I have now is that after doing everything according to
> the manual, including adjusting the ALC to get 1KW at the prescribed ALC
> setting on CW, I find that when talking on SSB I can get no more than
> 400 to 500 watts. Did you have this problem?
> 
> 73,
> 
> Warren AC7UA
> 
> 
> 
> 
> 
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom Users Net: Sundays, 1700Z, 14.315 MHz
> Icom FAQ: http://www.qsl.net/icom/