[Icom] W32a cloning disk questions

Wed, 28 Aug 2002 20:31:29 -0700

The software is looking for the Serial Number assigned to the software, not 
the radio.  You need to get the appropriate number from the original owner 
so you can install the software.

What might be a good idea would be to buy an updated copy of the 
software.  Since you already have the cable, you can buy the latest 
software for only $20.  See http://www.rtsars.com/

73, Dick

At 08:09 PM 8/28/2002, you wrote:
 >   This week I became owner of a used IC-W32a radio.   Included with it
 >was a Windows Cloning Software disk and cable.   The label on it
 >indicates it is from RT Systems.  I have no information on it, no
 >documentation or anything came for it, nor is there any type of readme
 >file on the floppy.   I've tried loading the program, but it goes into a
 >start window, that ask for a serial number.   I tried the serial number
 >on the radio, it told me it was not proper format.   I'm not sure what I
 >have, or how to proceed.   Can anyone give me any pointers on it?
 >Probably best to email me directly to [email protected] (k zero sd).
 >   Thank you.
 >
 >73's de Stephen, K0SD in NC
 >----
 >Your Moderator: Dick Flanagan W6OLD, [email protected]
 >Icom FAQ: http://www.qsl.net/icom/
--
Dick Flanagan W6OLD OOTC CFII Minden, Nevada
Visit http://www.cvrc.net