[Icom] Ant port on 706?

Mon, 19 Aug 2002 22:51:25 +0100

Hi

There's an internal 4AG size fuse on the PA board
(at the rear under the 2mtr coax ant line )
which is 4AMP rating in mine.
From the schematic, it fuses the external connector
AND 13.8 to the PLL Board and the fan.

HTH

73
David - VK4GL
Team Leader
VK9WI (2000)    www.qsl.net/vk9wi
VK9ML (2001)   www.qsl.net/vk9ml
VK9ML (2002)   www.qsl.net/vk9ml/2002

=============================================================
----- Original Message -----
From: "K8CM" <[email protected]>
To: <[email protected]>
Sent: Monday, August 19, 2002 3:16 PM
Subject: Re: [Icom] Ant port on 706?

|
| According to the information I have, the pin closest to the flat side of
| the connector is ground, the next is 13.8v dc, switched.
|
| I have also been cautioned, by many, that the 13.8v pin is internally fused
| @ 4 amperes.  I don't know what else it (the fuse) services, so be cautious.
|
| 73 <> Carl
|    K8CM
|
| At 07:17 AM 8/19/2002 -0400, you wrote:
| >Anyone have the pinout for the 4 pin antenna tuner connection on the back of
| >the 706? I am looking for 12 volts and ground. Is it there? Also could you
| >tell if it is hot when the radio comes on or only when the antenna tuner
| >function is on. Thanks for the help. 73's << John
| >----
| >Your Moderator: Dick Flanagan W6OLD, [email protected]
| >Icom FAQ: http://www.qsl.net/icom/
|
| ----
| Your Moderator: Dick Flanagan W6OLD, [email protected]
| Icom FAQ: http://www.qsl.net/icom/