[Icom] IC751A Logic Unit
Tony Hwang
[email protected]
Wed, 03 Apr 2002 20:45:43 -0700
Hi,
My 765 never had PSU problem but then I did pre-emptive strike. Replaced
all the caps and reinforced all the solder joints. Most of cheap
switching power supply trouble is caused by capacitor. Also the Molex
connector. Treated them with liquid gold, and tightened them pins.
73,
Tony, VE6CGX
daveg wrote:
>
> Tony -
>
> I agree. I have an IC-575A (25 watts with internal 110 volt supply). The first
> summer of operation, it started developing intermittant problems after it had
> been on for an hour or two. It was happy when the shack temperature was 60, but
> didn't like 80 degrees at all. I have since been running it on an external 12
> volt supply with no trouble.
>
> Dave, N2EPV
>
> anthony costa wrote:
>
> > that's why i avoid owning a built in PS rig.The design of the ft-990dc is a
> > radio that will outlast some of us.
> >
> > tony k2vi
>
> ----
> Your Moderator: Dick Flanagan W6OLD, [email protected]
> Icom FAQ: http://www.qsl.net/icom/