[HomeBrew] Re: HomeBrew Digest, Vol 40, Issue 3

[amdx]

----- Original Message ----- > From: Michael Sperry <msperry59 at comcast.net>
> Subject: [HomeBrew] More PVC enclosures
> To: homebrew at mailman.qth.net
> Message-ID: <4640ADA4.1010506 at comcast.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Another potential enclosure material is square PVC fence post.  I have
> some pieces left over from a fence installation that measure about 3.25"
> inside; enough to just get most of my hand in with a PCB.  1/8" thick
> walls machine well.  Just need to cap the ends. (I'm torn between
> painted scrap pine and patina copper post caps).  Even if you don't have
> a fence project, they're $13 per 6', $20 per 100" at the local Lowe's.
> Still not bad.
>
> 73 de mike KA1OMP

 A good source of flat stock would be a sign company.
Many signs are made of 3/8" foamed PVC. You will probably find their
scrap is large enough for your projects. It cuts and sands easily and you
can glue it with PVC pipe cement.
                                         Mike

>
>
> ------------------------------
>
> _______________________________________________
> HomeBrew mailing list
> HomeBrew at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/homebrew
>
>
> End of HomeBrew Digest, Vol 40, Issue 3
> ***************************************
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.467 / Virus Database: 269.6.5/793 - Release Date: 5/7/2007 
> 2:55 PM
>
>