[Henry] Ahoy Henry 2K owners

[David L. Thompson]

I have an old Henry 2K Serial #156 Floor Console.  This is the old model
with coverage of 80 to 10 but lacks the extra position to split 80 between
75 and 80.  12 years ago the bandswitch broke. The central bandswitch
actually switches 3 units and is just a switch that was originally braised
on. The switch is connected to dial cord that switches the bands.  The weld
broke and I super glued it with the same glue you use to hold rear view
mirrors on with.

I borrowed a diagram on how to take the Henry apart but have forgotten what
to do.  I know you can remove the box and RF deck from the power supply
chassis after removing the plug for the blower and unsoldering the time
delay trip switch.  I don't remember how to get into the back of the front
panel.  I seem to remember the front panel tilts forward (still very tight
to get at the hub). I either want to super glue the hub back on the switch
shaft or find a
junker with a complete switch.

Any help is appreciated.  E-mail me directly at thompson@mindspring.com.

73 Dave K4JRB