[Heathkit] dx-60 problems

[Doug Renwick]

Go to a hobby shop/ model railroad and get some 00-90 or 0-80 or 1-72 screws
and nuts.

Doug

-----Original Message-----

If the wafer of the switch is not badly burned, it is possible to carefully
drill out the rivet holding the contact in place and then replacing it with
a good contact removed from a donor switch.  Use a little machine screw and
nut as used in eyeglasses to secure the new contact.

If you put on a long face, you can probably get a machine screw and nut free
from one of those mall 1-hour eyeglass operations.  Also, there are kits,
that sell for around $1.00 at "dollar stores" for repairing eyeglasses that
usually have several machine screws and nuts therein.
 
Glen, K9STH 



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com