[Heathkit] AT-1 question

[Carl]

The AT-1 wasnt known as an example of efficiency Chris.

The 6L6 and other beam tubes will have a blue glow on the glass, this is 
normal due to the interaction of the electron stream and impurities in 
the glass

Gas will be seen inside the plate cylinder and in Class C CW is usually 
not a bother unless it is bad enough to cause internal arcing.

Carl
KM1H




----- Original Message ----- 
From: "Christopher J. Whewell" <agent at inventorweb.com>
To: <heathkit at mailman.qth.net>
Cc: <W9RAN at oneradio.net>
Sent: Wednesday, January 28, 2009 7:52 AM
Subject: Re: [Heathkit] AT-1 question


> Thanks alot Bob, I was vaguely familiar with Kanzius, but have
> extensively studied the works of Royal R. Rife, who invented a
> microscope that could see viruses in the 20's, isolated the cancer
> virus, typhus, etc. then used a MOPA transmitter having a coolidge
> tube as the capacitative element in a hartley oscillator output stage,
> and directed the output to cancer patients and cured all of them.   He
> isolated a dozen other pathogens and found what he called the MOR, the
> mortal oscillatory rate for each.   He also created a sort of
> "periodic table" of pathogens, analogous to Mendeleev's table. of
> elements.   I came into possession of one of his original later
> instruments back in 2005.   Rife ought have won a Nobel.    Henry
> Moray too.
>
> Rife was railroaded by AMA, who doesn't WANT cancer cured.    The
> system makes too much money from it, about $ 400 B annually.   A
> decent book describing this is "The Cancer Industry" by Ralph Moss,
> PhD, I think he is a former NIH executive.   Same pattern present
> relative to true working remedies provided by a dozen or so others,
> whose names you've never heard, like Naessens, Hoxsey, Ozel, Gerson,
> Krebs, Rath.    Ever notice how they're always trying to scare
> everybody ?   Boooo !!
>
> Today's medical industry trains the students in the medical colleges
> to "treat" symptoms, not cure disease nor prevent.  It's not the
> people that are at fault, rather, the system, which itself is
> structured to generate more cash by not providing cures, rather
> "treating" symptoms.   I have studied cures for years and consider
> myself an expert in healing.
>
> More on Royal Rife at the link below; I'd start with the John Marsh
> link.  Someone ought to have told these guys about impedance matching.
>
> www.rife.org
>
>
> I've checked everything four times over on that AT-1, except the
> obvious, for which I deserve a kick -   I didn't change the tubes.
> There's gas in the output tube, evidenced by visible ionization when
> keyed.   Pondering putting an 8950 in place of that 6L6, just because
> I have one and need to quell this cash bleed.
>
> What I don't get, on the AT-1 schematic, is how the RF gets to the
> coils ;  looks like inductive coupling by proximity to other coils on
> the same form, but only air core there and adjacent coils are axially
> disposed , not co-wound.   From the tank, through a selector switch,
> to another coil, then inductively coupled to another smaller coil,
> through a selector and finally out the window.    Seems inefficient,
> but I must assume I'm missing something.
>
> thanks,
>
> Chris
>
>
>
>
>
> On Jan 27, 2009, at 8:23 PM, Robert Nickels wrote:
>
>> Christopher J. Whewell wrote:
>>> Thanks a bunch for that.   My ultimate intent is scientific and
>>> development.
>>>
>>> Thanks for your help.
>>>
>>>
>> Chris,
>>
>> I wish you great success in your efforts.  To be honest  [ ..... ]
>> Best regards,
>>
>> Bob W9RAN
>>
>>
>
> _______________________________________________
> Heathkit Mailing List provided by QSL.net
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: dfischer at usol.com **
> ----
> List Info: http://mailman.qth.net/mailman/listinfo/heathkit
> Mailman FAQ: http://mailman.qth.net/mmfaq.html
>