[Heathkit] monitor scopes

[Bob Macklin]

What features of a monitor scope are you interested it in.

Both scopes display the RF on the feed line. The SB-610 CAN display the Rx IF. But it can be wired to display the audio. If the IF is to be displayed it must be wired for the proper IF frequency.

The SB-610 also has the needed tone generators for adjusting a SSB Tx.

I have both. The SB-610 in on my SB-301/SB-401 station. My SB-614 is on my DX-60/HG-10/HR-10 station. I am currently only using them to monitor the Tx RF.

Bob Macklin
K5MYJ
Kent (Seattle), Wa,
"Real Radios Glow in the Dark"

  ----- Original Message ----- 
  From: Michael Tortorella 
  To: heathkit at mailman.qth.net 
  Sent: Saturday, September 27, 2008 9:53 PM
  Subject: [Heathkit] monitor scopes


  G'day all, can anyone comment on the relative merits of the SB-610 and SB-614 monitor scopes?  As far as I can tell, the major difference is that the SB-614 runs off audio while the SB-610 needs an IF connection.  But there may be other things to be aware of.any comments from users of either or both would be most welcome.

  aTdHvAaNnKcSe and 73 to all

  Mike W2IY

   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/heathkit/attachments/20080928/dc42d467/attachment.htm