[Heathkit] SB-200/SB-201 Parts Needed

[Tom Chesek]

Yes, I already advised Jim that eBay has it for sale. Why is everyone afraid
to write the word "eBay"? Almost everyone uses it but pretends that they are
above using eBay. I use all resources available when looking for something.
If I need something I get it where it is available.

Tom K3TVC


----- Original Message ----- 
From: "jeremy-ca" <km1h at jeremy.mv.com>
To: "Tom Chesek" <tchesek at epix.net>; "Jim Brown" <harryjbrown at verizon.net>;
<heathkit at mailman.qth.net>
Sent: Sunday, January 06, 2008 11:27 AM
Subject: Re: [Heathkit] SB-200/SB-201 Parts Needed


> A certain place has a complete input assembly for sale.
>
> Carl
> KM1H
>
>
> ----- Original Message ----- 
> From: "Tom Chesek" <tchesek at epix.net>
> To: "Jim Brown" <harryjbrown at verizon.net>; <heathkit at mailman.qth.net>
> Sent: Sunday, January 06, 2008 10:54 AM
> Subject: Re: [Heathkit] SB-200/SB-201 Parts Needed
>
>
> > Hi Jim,
> >
> > I had a broken wafer "C" on my SB-201 and I bought a 2 wafer switch on
> > eBay
> > a while back from a seller in the Ukraine with the intention of using it
> > for
> > this repair. I never got to put it to use because I came across a
complete
> > SB-200 bandswitch assembly which I'm in the process now of installing in
> > my
> > SB-201.
> >
> > Here are the rubs and therefore why I'm posting to the whole reflector
for
> > other's input...this wafer is slightly larger than the original. I have
> > mounted it and it will just fit but with close proximity to the coils.
It
> > also does NOT have the shorting contacts on the rear of the wafer. The
> > rear
> > wafer contacts appear to short out all of the coils not in use. I don't
> > know
> > how much or if any impact this would be on operation. If others think
that
> > this is workable and if you don't find an exact replacement I will be
> > happy
> > to send you one of my 2 wafers. (I'm keeping one just in case)
> >
> > 73,
> > Tom K3TVC
> >
> >
> > ----- Original Message ----- 
> > From: "Jim Brown" <harryjbrown at verizon.net>
> > To: <heathkit at mailman.qth.net>
> > Sent: Sunday, January 06, 2008 12:02 AM
> > Subject: [Heathkit] SB-200/SB-201 Parts Needed
> >
> >
> > Hello,
> > I am looking for the rear Wafer 'C' that is located at the rear of the
> > tank coil band switch.  I found out that the rear Wafer was
> > cracked when I took it out to install a tank coil band switch ass'y.
This
> > is
> > for a Heathkit SB-200.
> > Let me know if this part is available.
> > 73 K8WVB Jim
> >
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date:
1/2/2008
> > 11:29 AM
> >
> >
> >
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 1/2/2008
11:29 AM
>
>