[Heathkit] SB-200/SB-201 Parts Needed

[jeremy-ca]

A certain place has a complete input assembly for sale.

Carl
KM1H


----- Original Message ----- 
From: "Tom Chesek" <tchesek at epix.net>
To: "Jim Brown" <harryjbrown at verizon.net>; <heathkit at mailman.qth.net>
Sent: Sunday, January 06, 2008 10:54 AM
Subject: Re: [Heathkit] SB-200/SB-201 Parts Needed


> Hi Jim,
>
> I had a broken wafer "C" on my SB-201 and I bought a 2 wafer switch on 
> eBay
> a while back from a seller in the Ukraine with the intention of using it 
> for
> this repair. I never got to put it to use because I came across a complete
> SB-200 bandswitch assembly which I'm in the process now of installing in 
> my
> SB-201.
>
> Here are the rubs and therefore why I'm posting to the whole reflector for
> other's input...this wafer is slightly larger than the original. I have
> mounted it and it will just fit but with close proximity to the coils. It
> also does NOT have the shorting contacts on the rear of the wafer. The 
> rear
> wafer contacts appear to short out all of the coils not in use. I don't 
> know
> how much or if any impact this would be on operation. If others think that
> this is workable and if you don't find an exact replacement I will be 
> happy
> to send you one of my 2 wafers. (I'm keeping one just in case)
>
> 73,
> Tom K3TVC
>
>
> ----- Original Message ----- 
> From: "Jim Brown" <harryjbrown at verizon.net>
> To: <heathkit at mailman.qth.net>
> Sent: Sunday, January 06, 2008 12:02 AM
> Subject: [Heathkit] SB-200/SB-201 Parts Needed
>
>
> Hello,
> I am looking for the rear Wafer 'C' that is located at the rear of the
> tank coil band switch.  I found out that the rear Wafer was
> cracked when I took it out to install a tank coil band switch ass'y.  This
> is
> for a Heathkit SB-200.
> Let me know if this part is available.
> 73 K8WVB Jim
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1207 - Release Date: 1/2/2008
> 11:29 AM
>
>
>