[Heathkit] Chippewa!

[revcom at wbsnet.org]

That is what I used to think too.  However I have a 4-250 that is
from Italy or somewhere, that has finned anode,  folded type not
the protruding type.  Metal anode not graphite.  Who knows?

Rod






> They are both 4-400's as they have fins on the anode. The unmarked one
> could
> be an earlier or later Eimac anode design or any number of other
> manufacturers.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "JT Croteau" <jt.n1ese at gmail.com>
> To: <heathkit at mailman.qth.net>
> Sent: Tuesday, November 06, 2007 2:47 PM
> Subject: Re: [Heathkit] Chippewa!
>
>
>> The tubes in my Chippewa don't appear to match.  One is clearly
>> labeled "Eimac 4-400A" but the other tube has no markings on it and
>> the plate is shaped a bit different.  Any ideas?  Here is a pic:
>>
>> http://n1ese.qrpradio.com/AM/4-400A.jpg
>>
>> --
>> JT Croteau, N1ESE - Manchester, NH (FN42gx)
>> _______________________________________________
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
>> Heathkit mailing list
>> Heathkit at mailman.qth.net
>> http://mailman.qth.net/mailman/listinfo/heathkit
>>
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>