[Heathkit] SB-610 Question

[Gary H. Harmon Jr.]

Replace the cap on the HORIZ GAIN control.  I had the same problem and it
fixed mine.

73, gary

=========////////==========
Gary H. Harmon, Jr. - K5JWK
6003 Archwood
San Antonio, TX 78239-1504
210.657.1549 - Home
210.884.6926 - Cell

(Retirement, where every days is a Saturday!)

-----Original Message-----
From: heathkit-bounces at mailman.qth.net
[mailto:heathkit-bounces at mailman.qth.net] On Behalf Of RJ Mattson
Sent: Wednesday, March 14, 2007 7:42 AM
To: Mark K3MSB; heathkit at mailman.qth.net
Subject: Re: [Heathkit] SB-610 Question

I recapped mine and the beam length is approx 1/2 the width of the tube.

The beam still has some horizontal jitters. Can anyone pinpoint the cause?

bob...w2ami 

----- Original Message ----- 
From: "Mark K3MSB" <k3msb at hughes.net>
Subject: [Heathkit] SB-610 Question


The horizontal display on my 610 is only about 1/2 the width of the 
tube, or maybe a bit bigger.   Is this typical, or should it be full 
width?   I haven't recapped the unit yet, so I can see where that may be 
the issue.

73 Mark K3MSB


_______________________________________________
List Administrator: Duane Fischer, W8DBF        
** For Assistance: dfischer at usol.com **         
$$ See the vintage area on the HCI web site - http://www.w9wze.org $$ 
Heathkit mailing list
Heathkit at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/heathkit