[Heathkit] SB-610 Question

[Peter Markavage]

The horizontal baseline should fill the screen from side to side and
beyond. I would also check the resistor values around the Intensity
control and the horizontal section. Maybe it's me, but I have yet to have
to change any caps in my SB-610 (have 2), 620 (have 2), HO-10, or HO-13
but I've had to replace numerous resistors in the HV and horizontal
section in all four models. Must be the Jersey air.

Pete, wa2cwa

On Tue, 13 Mar 2007 22:06:18 -0400 Mark K3MSB <k3msb at hughes.net> writes:
> Folks --
> 
> The horizontal display on my 610 is only about 1/2 the width of the 
> 
> tube, or maybe a bit bigger.   Is this typical, or should it be full 
> 
> width?   I haven't recapped the unit yet, so I can see where that 
> may be 
> the issue.
> 
> 73 Mark K3MSB