[Heathkit] Help with removing of knobs.

[wolfbob]

Sears has a set of EZOUTS or equivalent that are very small 
and require a very shallow hole. They will work on some 
Allen screws.

WBob
----- Original Message ----- 
From: "WØQFC" <erastber at tampabay.rr.com>
To: "Robert & Linda McGraw K4TAX" <RMcGraw at Blomand.Net>; 
"Mike Besemer WM4B" <mwbesemer at cox.net>; <OTAKEBI at aol.com>; 
<heathkit at mailman.qth.net>
Sent: Monday, July 31, 2006 4:07 PM
Subject: Re: [Heathkit] Help with removing of knobs.


> When all else fails, I have drilled out the screw (using a 
> bit that is the
> size needed if you were going to tap the hole).
> After the screw is out, just run a tap in the hole to 
> 'refresh' the threads.
> . . .
>
> 73
> Gene, WØQFC
> Spring Hill, Florida
> WEB SITE:
> http://www.w0qfc.com
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - 
> http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>
>