[Heathkit] HP-23 Power Supply Question

[Edward B Richards]

Dan;

You have to jumper pins 9 & 10 if it is not connected to a radio. Then
you have to turn the power switch ON.

73, Ed Richards K6UUZ
Simi Valley, Ca 93065
Home of the Air Force 1 pavilion
 
On Wed, 16 Aug 2006 12:52:46 EDT OTAKEBI at aol.com writes:
> I have an HP-23 power supply that is dead.
> It won't power up.
> No light on when switch is turned to power on.
> I hear nothing from the supply.
> I am sure the caps are bad and also the breaker.
> I plan to recap the supply using the Heathkit  Shop conversion 
> HP-23R board 
> so it can be used with a future purchase  of a Collins KWM-1 or 2.
> As you may know the conversion board is over $90.00 dollars and I do 
> not  
> want to waste money if the two transformers are bad.
> My question.
> Is there a way to check the transformers to make sure they are 
> good?
> This supply went out with previous owner and I have no paperwork on 
> it or  
> history.
> Got it for free so I have nothing to lose, so far.
> Thanks for help,
> Dan/N4VET
>  
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org 
> $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
> 
>