[Heathkit] Help on HO-10 Update "almost"

[peter markavage]

This is from Mouser's on-line
catalog. $2.50 to $3 each depending
on quantity.
Under ideal conditions focus pot setting should
be roughly mid-way between CCW and CW.

Polypropylene Capacitors
Description:CDE HV Metallized Polypropylene Film Capacitors 1600V .15uF


Polypropylene Capacitors
Description:CDE HV Metallized Polypropylene Film Capacitors 1600V .10uF




On Wed, 02 Feb 2005 15:07:45 -0500 Jim Brannigan <jbrannig at optonline.net>
writes:
> Newark Electronics
> Polypropylene .1mfd @ 1600VDC
> SKU:862-2432
> 
> Jim
> 
> > Found one bad resistor on the focus pot and replaced it.
> > Also replaced a 100 ohm resistor on back of the CRT coming form 
> the focus
> pot.
> > Now trace is sharp with the focus control all the way clockwise.
> > However, I have fuze and trace is still out of focus on the left 
> side near
> > the end of the trace.
> > After about 15 minutes line goes out of focus again.
> > The 1600 volt .15 mfd caps can't be found.
> > Any information from someone who has fixed this problem or located 
> caps?
> > Thanks,
> > Dan/N4VET