[Heathkit] Help on HO-10 Update "almost"

[Jim Brannigan]

Newark Electronics
Polypropylene .1mfd @ 1600VDC
SKU:862-2432

Jim

> Found one bad resistor on the focus pot and replaced it.
> Also replaced a 100 ohm resistor on back of the CRT coming form the focus
pot.
> Now trace is sharp with the focus control all the way clockwise.
> However, I have fuze and trace is still out of focus on the left side near
> the end of the trace.
> After about 15 minutes line goes out of focus again.
> The 1600 volt .15 mfd caps can't be found.
> Any information from someone who has fixed this problem or located caps?
> Thanks,
> Dan/N4VET