[Heathkit] Re: Spiral Follower

Thu, 06 Feb 2003 10:36:29 -0600

I have a small lathe, but not sure I can make it. I'm not good on a lathe. 
Haven't seen one and I'm not inclined to open up my SB-101. Are they the 
same on all radios? I like Tom NE7X's idea.

Tom
>================================
>Date: Wed, 05 Feb 2003 23:36:41 -0500
>From: [email protected]
>To: [email protected], [email protected]
>Subject: Re: [Heathkit] Re: Spiral Follower
>
>The one in my SB-401, the tip broke off, so what I did is drill a small 
>hole into the center of the main piece were the tip was and inserted a 
>small screw, then cut off the screw head. It still working after 3 years.
>Tom NE7X...
=======================
>Date: Wed, 05 Feb 2003 19:52:17 -0800
>From: kevin schuchmann <[email protected]>
>Subject: Re: [Heathkit] Re: Spiral Follower
>To: [email protected]
>
>Hi All,
>   might try asking at your local hobby shop if they know of any one with 
> a small lathe, should be easy to spin them out...
>Kevin
>wa6fwf
=========================
At 03:02 AM 2/6/03 , you wrote:
>Date: Wed, 05 Feb 2003 09:10:23 -0600
>To: [email protected]
>From: Tom in N Texas <[email protected]>
>Subject: [Heathkit] Re: Spiral Follower
>Norm, if you find a source for these, please let me know. I have an SB-101.
>Thanks,
>Tom Dulin
>========================
> >Date: Tue, 04 Feb 2003 08:32:24 -0600
> >From: Norm Wolfe <[email protected]>
> >To: [email protected]
> >Subject: [Heathkit] Nylon Sprial follower
> >Help:
> >I am desperate for the little white nylon sprial follower which attaches
> >to the "Dial pointer drive arm".  I am dead in the water right now.  If
> >someone can help and has one please let me know by e-mail or call
> >collect at (920) 568-9018.
> >Thanks
> >Norm
> >KL7IVK