[HBR] Chassis Questions

[Steve]

I have some of the tools to do that...I have a foot stomp shear, and a small
brake but it doesn't have fingers...I can cut .063 soft aluminum and bend it
pretty well.  So that is an option but am better at layout and soldering..

Steve
 

-----Original Message-----
From: hbr-bounces at mailman.qth.net [mailto:hbr-bounces at mailman.qth.net] On
Behalf Of Bill Cromwell
Sent: Tuesday, March 04, 2014 5:10 PM
To: hbr at mailman.qth.net
Subject: Re: [HBR] Chassis Questions

Hi Steve,

What about making one?

73,

Bill  KU8H


On 03/04/2014 05:54 PM, Steve wrote:
> Hii All
>   
> I am making progress on building up a 2x4+1 receiver as a learing 
> exercise before I tackle the HBR 14.  However, I have been locating 
> parts etc but still have not found the chassis I want.  Now that  
> Charles Byers, K3IWK is a silent key and his buisness is closed up I 
> wonder if anyone has found another supplie of good chassis's...I know 
> that I can get something from Bud or Hammond but they seem a bit on 
> the light duty side and will flex maybe more than they should.  Anyone 
> have any ideas on where to obtain a good chassis??
>   
> Steve NU0P
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html