[HBR] Using a BC-453 BFO

[B Smith]

A picture would be appreciated and it would help 
others realize that
when testing circuits everything does not have to 
be pretty, but what
I should not tell them is that when the circuit is 
ugly it always works but
when you clean it up it always fails. 
:-)
now I will have to go back and see what I did 
wrong, maybe I got
pin 1 and 3 reversed.

--------------------------------------------------
From: "Ian Wilson" <ianmwilson73 at gmail.com>
Sent: Friday, June 17, 2011 2:22 PM
To: "HBR Receiver List" <hbr at mailman.qth.net>
Subject: Re: [HBR] Using a BC-453 BFO

> Hi Breck,
>
> You are welcome to post the results. My test 
> setup is exceedingly
> bare-bones,
> and I would not like anyone to use my 
> construction practices, but I will
> take
> a picture anyway :)
>
> 73, ian
> ______________________________________________________________
> HBR mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html
>