[HBR] HBR-11 Template??

[B Smith]

Hi Scott
I  recommend you build the BFO circuit first. The 
BFO enclosure size may determine location of other
major components  on the chassis.  Also it gets 
you in the building and testing  mode.     :-)
(http://k4che.com/HBR/BFO%20Coil%20Page%201and%20photos/BFO%20Coil%20Page%20%201.htm)

73

breck k4che

--------------------------------------------------
From: <whitebear1122 at comcast.net>
Sent: Wednesday, June 15, 2011 8:32 PM
To: "HBR Receiver List" <hbr at mailman.qth.net>
Subject: [HBR] HBR-11 Template??

>
>
>
> The HBR-11 QST article offers  full scale 
> templates of the chassis and front panel.  Does 
> anyone actually own a set of these?  I'd be 
> happy to pay for a copy, maybe Kinko's can make 
> a full size copy.
>
>
>
> I have most of the unobtainium parts now for an 
> HBR.  I'm pretty much set on building an HBR-8 
> to start out with since I've never built any 
> radio equipment complicated like this before. 
> I have a set of BC-453 85 KC IF transformers, a 
> 100 Khz BFO coil, Eddystone 898 dial, 3 section 
> variable capacitor.  I'm in the process of 
> creating a parts list and ordering the caps, 
> resistors, tube sockets, etc..   I'm thinking of 
> building it on a 17" wide chassis rather than 
> attempting to shoehorn it onto a 14" chassis for 
> my first attempt at building a receiver.
>
>
>
> If you have a W6TC template, it would be a big 
> help to this novice builder.  Thanks. 73, Scott 
> WA9WFA
> ______________________________________________________________
> HBR mailing list
> Home: 
> http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: 
> http://www.qsl.net/donate.html