[HBR] HBR BFO Construction Page Added

[Bill Fizette]

Really great info, Breck.  Thanks very much for following up on this loose 
end.

73,  Bill  w2dgb



----- Original Message ----- 
From: "B Smith" <smithab11 at comcast.net>
To: "HBR Receiver List" <hbr at mailman.qth.net>
Sent: Saturday, December 24, 2011 10:31 AM
Subject: [HBR] HBR BFO Construction Page Added


> I have added  an additional page to my BFO section for the HBR series
> receiver.
> The circuits were submitted by Ian Wilson and Pete WB2JWU.  Ian used
> Z4 the
> Command Set BFO coil which is tapped  and Pete modified the original
> HBR-16 BFO  to a Colpitts as he did not have a tapped coil.
>
> I highly recommend that the new builder  start on the BFO circuit
> first as
> coil selection and size of the enclosure will effect your
> construction.
>
> Merry Christmas to all on the HBR list.
>
> breck k4che
>
> (http://k4che.com/HBR/BFO%20Coil%20Page%201and%20photos/BFO%20additions%5D/BFO%20Additonal%20Circuits.htm)
>
>
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>