[Hammarlund] Alignment of Sp600-JX-17

[Al Parker]

Hi James,
	You've had lotsa good advice already.  When you do get to alignment, 
basically just follow the manual.  Do find the freq. of the xtal filter 
and use that for your IF alignment.
	But first, figure out about this AM signal, is it really there, about 
where the dial says, or not.  Is that the only problem?  Do the bands 
all hear signals?  Do some checking before you jump into alignment, or 
you may be wasting your time.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 4/3/2014 9:18 PM, James Green wrote:
> I am about to start my first alignment of a  SP600-JX-17.  I have a good frequency generator and power output meter.
> Would someone please advise me things I need to pay attention too. The radio works I hear AM radio but it is in the  wrong band, I have know history of the radio, when I received the unit it  did not receive, you Gus help me find  the problem, I have checked tube voltages and everything seams to be in reasonable order. Am I ready to align or do I need to go back in to the receiver.
> Jimmy K5CSU
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>