[Hammarlund] Any trick to this?

[Al Parker]

Hi Bob,
	The hands should pull straight off, but may be stuck.  If there's a 
small slot in the hand's "hub" radially from the hole, you may be able 
to press a sharp knife blade into the slot which will spread the hub 
slightly and break things loose.
	I've never found an exact fit knob for this clock, but have managed to 
modify ones that were originally made for an old electric alarm clock.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 3/8/2013 8:38 PM, Robert Sauvan wrote:
> Hi all,
> I am in the process of rebuilding a HQ clock. It is in need of a new face.
> Is there a trick to pulling the clock hands off so I can reuse them without
> damage.Im afraid to just pull them off and ruin the tight fit.Maybe there
> just isnt another way? Also,I am in need of the knob for this clock in case
> anyone may have a spare laying around they would be willing to part with.
>
> Thanks-Bob-W0YBS
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>