[Hammarlund] SP-600 IRecapping Finished)

[Richard Knoppow]

----- Original Message ----- 
From: "Richard Knoppow" <1oldlens1 at ix.netcom.com>
To: "James A. (Andy) Moorer" <jamminpower at earthlink.net>; 
<hammarlund at mailman.qth.net>
Sent: Saturday, January 28, 2012 4:49 PM
Subject: Re: [Hammarlund] SP-600 IRecapping Finished)

Correction:  I said the accuracy of the dial was 2%, I meant 
0.2%  Hammarlund gives this value in some places and 0.25% 
in others. This is very good calibration for a mechanical 
system.


--
Richard Knoppow
Los Angeles
WB6KBL
dickburk at ix.netcom.com