[Hammarlund] Hammarlund SP-600

[Al Parker]

Hi Tom,
	I'll try a few answers--
	I don't know where to find the large (or small) "top-hat" hold-downs. 
If you find a source, pse let me know, I could use some.
	The bottom cover is just a plain flat sheet, no holes other than the 
mounting holes.  Top is similar, plain flat, but a small angle bracket 
in each corner to att. to the posts.
	I think I bought a qty of hole plugs from Grainger a yr or 3 ago, not 
cheap, but better than 2 or so at a time from Sears, etc.  I'll see if I 
can locate some.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 4/22/2012 11:43 AM, Tom Lewis wrote:
> Hello,
>
> I need some help with a SP-600 JX-26 (SN 13432) that I purchased at the Richmond VA hamfest back in February.
>
> I have replaced all the electrolytic and paper capacitors. For the audio
> output, I am using  a 70 V, 15 watt line matching transformer that I purchased
> from Parts Express. Their part number 300-039.   The radio is working okay with the new capacitors and audio transformer.
>
> Where can I buy a rectifier tube hold down bracket?  The radio has the
> long screw next to the tube but the bracket at the top is
> missing.
>
> I have to make or buy a
> bottom cover. Does the bottom cover have any holes in it other then the 7 for
> screws that hold it in place?  Does anyone have one for
> sale?
>
> Where can I buy new caps for the 3/8 inch tuning holes?
>
> Thanks
> Tom, N4TL
> ________________________________________________________