[Hammarlund] Hammarlund SP-600

[Joe Connor]

Tom:
 
    Sears sells plugs that fits the holes in the tuner assembly. If I remmeber correctly, they're fairly steep (more than $1 each) but they look good. I suspect that other hardware outlets sell them, too.
 
                          Joe Connor

>________________________________
>From: Tom Lewis <n4tl2 at yahoo.com>
>To: "hammarlund at mailman.qth.net" <hammarlund at mailman.qth.net> 
>Sent: Sunday, April 22, 2012 11:43 AM
>Subject: [Hammarlund] Hammarlund SP-600
>
>Hello, 
>
>I need some help with a SP-600 JX-26 (SN 13432) that I purchased at the Richmond VA hamfest back in February.
>
>I have replaced all the electrolytic and paper capacitors. For the audio 
>output, I am using  a 70 V, 15 watt line matching transformer that I purchased 
>from Parts Express. Their part number 300-039.   The radio is working okay with the new capacitors and audio transformer.  
>
>Where can I buy a rectifier tube hold down bracket?  The radio has the 
>long screw next to the tube but the bracket at the top is 
>missing.
>
>I have to make or buy a 
>bottom cover. Does the bottom cover have any holes in it other then the 7 for 
>screws that hold it in place?  Does anyone have one for 
>sale?
>
>Where can I buy new caps for the 3/8 inch tuning holes?
>
>Thanks 
>Tom, N4TL
>______________________________________________________________
>Hammarlund mailing list
>Home: http://mailman.qth.net/mailman/listinfo/hammarlund
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Hammarlund at mailman.qth.net
>
>List Administrator: Duane Fischer, W8DBF
>** For Assistance: dfischer at usol.com ** 
>
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>