[Hammarlund] Need IF transformer

Carl km1h at jeremy.mv.com
Sun Mar 29 21:44:52 EDT 2009


Welcome to the world of Hammarlunds silver mica disease. Youre better 
off fixing what you have rather than having to do it all over again. 
Eventually the other transformers in the radio will also fail.

With a steady signal tuned in, hook a scope lead to the plate pin of 
each stage ( set the scope on AC) until you find the bad one. An AC VTVM 
that works at the IF frequency will work also, especially on the grid 
pin side but the failure will be on the plate side most of the time.

Carl
KM1H


----- Original Message ----- 
From: "Al Parker" <anchor at ec.rr.com>
To: "Dave Wood" <w4ej at nc.rr.com>
Cc: "Hammarlundqth" <hammarlund at mailman.qth.net>
Sent: Sunday, March 29, 2009 7:46 PM
Subject: Re: [Hammarlund] Need IF transformer


> Hi Dave,
>    I could well be the crappy way they embedded caps in the base of 
> the
> xfmr.  I've had a cupl like that.  If you're lucky it's one close to 
> the
> edge of the chassis & you might be able to remove the can & dig out 
> the crap
> around the cap, it'll probably be charred.   Then you can put the 
> proper cap
> underneath.  A few guys on this list have junkers, maybe one can help 
> with a
> replacement, but they sure are a pain in the Axx to remove & replace. 
> Sorry
> I don't have a parts donor now.
>    (I'll send you an off topic post later tonite)  Hope to see you & 
> Joanne
> at RARsfest in a cupla wks.  Gat anything neat that I oughta have?
> 73,
> Al, W8UT
> New Bern, NC
> www.boatanchors.org
> www.hammarlund.info
>
> "there is nothing -absolutely nothing- half as much worth doing as 
> simply
> messing about in boats."
>   Ratty, to Mole
>
>
> ----- Original Message ----- 
> From: "Dave Wood" <w4ej at nc.rr.com>
> To: <hammarlund at mailman.qth.net>
> Sent: Sunday, March 29, 2009 6:28 PM
> Subject: [Hammarlund] Need IF transformer
>
>
>>I have an HQ-170 with a sick IF transformer that is intermittent.  The
>> Hammarlund part # is K38895-1 which is the first IF transformer after 
>> the
>> mixer tube.  If anyone has one out of a spare parts unit, please 
>> contact
>> me
>> off the net.  Thanks in advance.  Dave  w4ej at nc.rr.com
>>
>>
>>
>>
>>
>> ______________________________________________________________
>> Hammarlund mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Hammarlund at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 



More information about the Hammarlund mailing list